Preparation Before Use

Check Product Condition: Ensure the product is in good condition and place it in a dry area, away from direct sunlight.

Surface: Use the product on a flat, solid surface such as the floor. To reduce noise, place a carpet underneath.

Power Supply: Verify that the voltage at home matches the specifications (110V/60Hz).

Step-by-Step Operation

Step 1: Power Connection

Plug in the Power: Connect the power plug into a socket with the corresponding voltage. The red light on the control panel will flash, indicating the product is in standby mode.

Step 2: Using the Product

Sit Down and Position Feet: Sit in a chair at an appropriate height and place your feet into the massager.

Turn on Power: Press the power button on the control panel to begin the massage. The default operation duration is 15 minutes.

Switch Off After Use: Turn off the power switch and unplug the device when not in use.

Control Panel Features

On/Off Key:

Press to turn the device on (indicator light will stay on) and off (indicator light will flash).

Automatic Mode Key:

Press to start automatic mode with three settings:

Mode 1: Combined air pressure and roller massage.

Mode 2: Primarily roller massage with air pressure as a supplement.

Mode 3: Primarily air pressure with roller massage as a supplement.

Strength Key:

Adjusts the intensity of the foot roller when air pressure is off.

Adjusts air pressure intensity when air pressure is on. Options are:

Medium > Strong > Weak.

Air Pressure Key:

Press to turn the air pressure on/off and adjust its intensity. Options: Medium > Strong > Weak > Off.

Warmth Key:

Adjusts the heat during massage with options: Medium > High > Low > Off.

Product Specifications

Model: M-9200

Voltage: 110V/60Hz

Power: 30W

Massage Time: 15 minutes

Weight: 6kg (net), 8kg (gross)

Origin: China

Be sure to follow these instructions for optimal use and safety!