ISO 9001:2015 Certified

+91  83060-44124, 86969 05205  Cash On Delivery Available

USER MANUAL BodyCure V3+

USER MANUAL BodyCure V3+ Machine generated alternative text: Thermal Jade Massage Bed
User Manual

 

Machine generated alternative text: Contents
Importantsafetyissues 1
Ground connection method 4
The name of each part 5
Remote control layout 6
How to use the remote control 8
Mode instruction 10
Notebeforeuse 14
Product composition 15
Product installation 16
Howto move the product 18
Self inspection 19
Configuration table 20
Product specifications 21

 

Machine generated alternative text: important salety issues
This appliance is not intended for use by persons(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person responsible for their Safety. Children
should be supervised to ensure that they do not play with the appliance.
The information below stands to protect the safety of the user and to prevent any property damage. All users
must read the manual and use the product appropriately. The important safety issues are divided into ‘Danger’,
“Warning and “Caution and their meanings are as follows. This picture is a symbol used to warn in case of
dangerous situations or dangerous control methods.
In case of violating the instructions, there is an emergent possibility of
serious damage or even death.
In case of violating the instructions, there is some possibility of serious
injury or death.
S Be careful not to get burned from unintended use.
Please follow the instructions carefully in order to reduce potential electric shocks.
1. While using this product, do not use pins or other metals.
2. Please check the frame before use. If there are any signs of cracks, breaks or expiration.stop using
the product.
3. Do not use the product when there is humidity or water.
4. The external projector must be used with the external projector cover so that there is no direct
contact between the product and skin. (There is risk of receiving a burn).
5. To prevent damage to the eye (eyeball), do not place the external projector directly on the eye.
6. In case of thunder, lightning or an earthquake, please stop using the product and unplug it.
(There is risk of receiving an electric shock or a burn.)
7. Do not pull the cord to unplug or touch the power plug with wet hands.
8. Apart from the mode for massaging the abdomen or the manual mode, do not use the product
laying face down. (If the product is used lying down, do not use near the rib cage and only on the
abdomen.)
A
Danger
A
Warn ng
A
Caution
In case of violating the instructions, there is possibility of minor or
property damage.
The least favorable working condition is to use the thermal and massaging fund
continuously while applying 135kg on the main mat and the supporting mat.
A Danger • r

 

Machine generated alternative text: important salety issues
A Warning
In order to prevent injuries from burns, fires and electric shocks, one must connect to a
socket that has a ground connection.
Be certain of how to connect to the socket before using the product.
1. Only use the product if it is in mechanically complete condition.
(If damaged products are used, there is a possibility of injury or burns)
2. If you have finished using the product of will not use it for a long time, unplug the product.
3. Apart from the external projector cover provided by our company, do not place other products
(Overheating can cause fires and electric shocks.)
4. In case of use by a disabled person of children, guardians must be present.
*Wamirlg! Keep children away from where this product has been installed
*warningl Make sure that children do not jump on the thermal massage bed.
5. Do not use the product if they are in the conditions, mentioned below. Call the customer Center and
request inspection or after-service.
- If the product has been dropped or is damaged
- If the product is wet
- If the cord or the power button is damaged. (There is a risk of an electric or a fire.)
6. Keep the power cord away from electric heating appliances or heaters.
7. This product has only been designed for indoor use. Do not use it outdoors.
8. Do not use the product where there are foreign substances in the air or places that handle oxygen.
9. Do not use or apply skin care, cosmetic or medical products on your skin before and during the
usage of this product.
10. When dismantling the product, make sure both the remote control and the main system are
switched off before unplugging.
11. Be cautious of heated surfaces.( Can cause severe burns)
12. Do not use the external projector on parts of the body that have low levels of sensitivity or parts
that have reduced blood flow.
13. Please do not sleep on the equipment.
14. Do not randomly disassemble, repair or remodel the product. Call the customer center when in need
of a repair. (There is a risk of electric shock and injury.)
15 Please take care not to insert your hand or any other body part into the main equipment or auxiliary
parts.( There is a risk of electric shock and injury.)
16. To avoid the risk of injury:
- Pregnant women, people in poor physical shape or undergoing any medical treatment, and people
suffering back, neck, shoulder or hip pain should consult their doctor before using the product.
- If you have a pacemaker, defibrillator, other artificial implants or other medical devices, Consult
with your doctor prior to use.
- If you have sensitive reactions or allergy to heat, you should also consult your doctor before using
the product,
- Do not use on bare skin; always wear clothing.
- Do not use if you have had any major surgeries, including back and /or hip surgeries.
- Consult your doctor prior to use if you have any external wound(s) or infection(s) on the skin
where the product will come into direct contact with your skin.
- Immediately stop using the unit if you start to feel sick or uncomfortable, or if the massage seems
too painful.
02

 

Machine generated alternative text: Important safety issues
- As of now, there is no evidence to suggest that this product interferes with or influences medications.
Those taking any prescribed medications should consult their doctor before using this product.
- Do not go to sleep while using the unit.
- Do not use the unit after drinking alcohol.
- Do not allow children or pets to play on or around the unit, especially during operation.
- Weak circulation in legs or heart diseases.
- Pain without cause defined.
Caution
1. When using the internal projector, do not twist your body and use itwith a straight posture
2. When the product is set to high temperatures, there is a risk of burnsso set the projectors
temperature at an optimal level. (Depending onthe physical constitution or thickness of skin ,use the
product at optimal temperature).
3. Those with sensitive skin must use the product at lower temperatures.(There is a risk of burns)
4. Children, those who cannot control the temperature by themselves, and those who have weak sensory
skin must be cautious of using the product for an extended period even if it is set at a low temperature
because there is risk of receiving a burn. (WarnE Please use while wearing clothing).
5. If there are any abnormal symptoms while using the p uct you must consult a doctor before using it again.
6. Do not bend the power cord or the outer wiring b force. (There is a risk of electric shocks and fires.
7. Do not place flammable objects (candles, cigarett and alcohol), objects with water in them ,heavy
objects or sharp objects on top of the product. (T y can cause electric shocks and damage.)
8. When climbing on or off the product, be cautious of the risk of falling.
9. Use according to the instruction manual and keep to the duration and methods instructed n the
manual. (Use l-.2 times a day and do not use other products unless supplied by the manufacturer.)
10. Do not use the external projector(s) for more than 2—3 minutes on one part of the body.
(The projector must be moved to another part of the body after 2—3 minutes).
li. Do not apply shock to the product.
12. Do not close the supporting mat or detach the remote control during use.(The active mode is
automatically terminated,)
13. The appliance has a heated surface. Persons insensitive to heat must be careful when using the appliance.
14. Please take care not to spill any foreign substance in between the main equipment and the auxiliary
parts. (It can cause electric shock, fire, injury, and equipment failure.)
15. Please do not throw the remote control or pull on the connecting cable.(It can cause injury and
equipment failure.)
16. The Automatic Thermal Massager is intended for muscle relaxation therapy by delivering heat and
a soothing massage to the applied areas.
Important information on symptom
In some cases there may appear a so-called initial aggravation. This initial aggravation may begin with
a subjective increase of symptoms prior to the desired healing. The effect of initial aggravation is also
known from other treatments (for e.g. the science of homoeopathy), which is defined as the reaction of
healing and / or the clearing of blockages. The initial aggravation that may occur does not constitute an
exclusion criterion of the application of product.
In the case of excessive pain related to pre-existing spinal conditions, distinct hypertension, cardiovascular
diseases or dizziness, please first reduce the intensity of usage (duration & temperature).
In cases in which the initial worsening leads to excessive continual pain please stop the therapy and consult
a medical doctor immediately to clarify if and under which circumstances the therapy can be continued
or ceased.

 

Machine generated alternative text: This product must be connected to a ground connection.
The ground connection reduces resistance against electric currents in case there are any
defects or breakdowns which may lead to electric shocks and damage. On the product,
there are conductors and electric terminals where the power cord is located, The power
cord has been installed to comply with regional laws; therefore it must be connected to
where there is a socket.
Check the connection of the product.
Danger (Inappropriate connection may lead to electric shock and damage.)
If you suspect that the product’s power cord and connection point has a problem, request
investigation from an electrician or service personnel. This product is for 220-240V-’ and the power
terminal is installed as can be seen in the picture on the right. Connect the power cord to a socket
that looks like the one shown in the picture. This product does not use an adaptor.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limit for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference ¡ri a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Changes or modifications not expressly approved by the party responsible
Caution for compliance could void the user’s authority to operate the equipment.
04

 

Machine generated alternative text: The name of each part
Head cushion
Main body mat
Remote Control
Power Switch
Speakers
Main frame
/
/
Internal Projector
Main heating element
Supporting frame
Power line
connector
External projectors connector
— - —--
— -. -
—
-,
Main body mat lift connector
Support mat heating
connector
Supporting mat
(Heating element)
Earphone Remotç control connector
core

 

Machine generated alternative text: emote controi iayout
Mode Symbol
Music Options Symbol
Up button
Mode button (Model—6)
Temp button
Strength /Back angle
adjust button
Interval /Positioning
massage button
Volume Symbol
Down button
Timing button
Power button
Music / Volume
control button
Play/Pause button
Internal Projector Temp
Main Heating Element symbol
Strength Symbol
Back angle symbol
Interval massage mode
Time Display
External Projector
Temp
Auxiliary heating
element symbol
Leg Warmer (Optional)
Vibration Symbol (Optional)
Positioning massage mode
Vibration button
(Optional)

 

Machine generated alternative text: icemote controi iayout
Mode symbol
Massage head
position
Timing Symbol
Mode select display, middle arrow flashing means running that mode.
Dots showing on the body means position of the massage heads.
Time display, shows running time of the mode that are running, when
finish a mode, the appliance will automatic stop
—
Show the temperature of the internal projector, the highest
temperature is 65°C
External projector temperature display, the highest temperature is 65C.
The main body mat temperature disp4ay, the highest temperature is 65GC.
The supporting mat temperature display,the highest temperature is 65°C.
The leg warmer temperature display,( it is the optional function for
future upgrade, without this function at present).
There are three levels of strength(only applicable to products with
choices of strength).
Back lifting control, upward arrow means lifting up, and downward arrow
means going down(only applicable to products with this function).
Vibration function design, without this function at present (the
optional function for future upgrade).
The length of interval massage is 13cm, the work time is automatic
set 10 minutes, after 10 minutes, it will restore to the previous
massage program.
The work time of the positioning massage automatic set 5 minutes,
after 5 minutes. it will restore to the previous massage program.
Tracks selection, l-99 track options
Temperature
symbol
Strength symbol
Back angle
symbol
A
—
V
Vibration symbol
Interval
massage mode
Positioning
massage mode
Music tracks
symbol
Volume level
symbol
Play/pause
symbol
Volume selection, 1 - 6 volume level.
Play/pause
07 I

 

Machine generated alternative text: How to use the remote control
3.1 Turning on the remote control
3.2 Mode selection
I
LI ‘P k’l hL.
s ii
3.3 Temperature adjustment
Combined using the temperature key, up key, and down key adjust the
temperature of the internal projector, external projector, main heating
element, and the auxiliary heating element.
Press the temperature key once, the internal projector temperature
symbol will flash, now press the up key or down key can adjust the
temperature of the internal projector; then press the temperature key
again, the external projector temperature symbol will flash, that means
now the user can use the up key or down key adjust the temperature
of the external projector;
Through press the temperature key, the temperature symbol will cycle
flash between the internal projector symbol, external projector, main
heating element, the auxiliary heating element, and the leg warmer
(the optional item for future), then combined with the up key and
down key adjust the desired temperature.
Turning on: first of all, confirm the remote control connection is normal,
Press the power key of the remote control, the LCD will
display the initial settings (temperature, time ,etc), and the
internal projector will initialize itself, after that, the bed will
start work from Mode  and the temp, the time etc can
be adjusted freely.
Turning off: long press the power key of the remote control (about 3
seconds) closed the appliance, the internal projectors will
reset to the initial position (in the middle position of the
bed back part), then the user can turn off the power switch
on the connector board, if not turn off the main power
switch, the remote control will flash one time in 10 seconds
and remind the user turn off the main power switch if not
use the appliance.
Using the mode button select the desired mode
Press the mode button once, the mode will automatically change
to the next mode, and the mode will cycle between modes l-6,
Before each mode start work, the appliance will automatically
detect the body height.
L
34 Time
08
Time display, shows running time of the mode that are running,
The timing of each mode will start from zero, when finish a mode,
the appliance will automatic stop.

 

Machine generated alternative text: How to use the remote control
3.5 Strength and back angle adjustment
3.6 Interval / positioning massage selection
3.8 Music play and pause selection
Music play /pause selection
Press the Play/Pause key once, music will play, press the key again,
music will pause.
Through press the Play/Pause key, the symbol will flash between
the Play “ symbol and ‘Pause” symbol.
(The leg vibration function is the optional function design for
future upgrade, at present without this function on this appliance.)
Adjust the legs vibration intensity combine with the ‘Up and
“Down” key: Press the Vibration key, the vibration symbol will
flash, now press the Up key or Down key adjust the vibration intensity.
Press the Vibration key 3 times consecutive will turn off the vibration.
091
Adjusting the massage intensity and the back angle combine with
the Up key and Down key.
Press strength/back angle key once, the strength symbol will flash,
then click Up’ or “Down” key adjust the strength; then press
the strength/back angle key again, the back angle symbol will flash,
now can through dick” Up” or ‘Down” key adjust the back angle.
Through press the strength/back angle key, the symbol will flash
between the strength symbol and the back symbol.
Select interval massage or fixed point massage
Press the key of interval / positioning massage once, the positioning
mode symbol will flash, now the internal projector will stop there
and do fixed point massage, if presses the key of interval/positioning
massage twice, the interval mode symbol will flash, now the internal
projector will stop there and do up and down interval massage
(interval about 100mm).
Through press the interval/positioning massage key, the symbol will
cycle flash between the interval mode symbol and the positioning
mode symbol. The intensity can be adjusted when use the fixed point
massage; the fixed point massage running time is 90 seconds; the
interval massage running time is 300 seconds.
3.7 Music / Volume control
L
Music/Volume adjustment combine with the Up key and the Down key
Press the Music/Volume key once, the Music option symbol will flash,
now press the Up key or the Down key select the music ; if press the
Music/Volume key twice, the Volume symbol will flash, now press the
Up Key or the Down key select the volume.
Through press the Music/Volume key, the symbol will flash between
the Music option symbol and Volume symbol.
3.9 Legs Vibration function control

 

Machine generated alternative text: Mode Instruction
4.0 The instruction when the appliance be used as a sofa bench.
When the appliance in folding status, it can be used as a sofa bench, if power on,
for security, only the music function can be use.
I___
Ï”,
L
Music play and pause selection
Press the button, music playback, press the button again,
music playback pause.
When use this appliance, please lay down with a good posture, the appliance will automatically
detect the body height and provide a appropriate massage to the user.
L. Pt r-it
S’L.p 1o 2 minutes
. . Rmgrerrnnd
. Stail
.
End
The dashed line represents the part of detect the body height
the solid line represents the part of running mode.
Program Symbol Instruction
Turn on the remote control,
program will start work.
When use this appliance, please lay down with a good posture.
the appliance will automatic scan the body height from the initial
position to the head position, after the scanning , the appliance
will work as per the selected mode.
•  fl.-.j’m-;

 

Machine generated alternative text: Mode Instruction
Breath Program Instruction
‚-
r-’
‘-
The breath program means the jade roller stop in a positioin and go up and down,
Turn on the remote control, the appliance will automatic select
mode L after the body height scanning, it will automatic work
from the mode 1, during the running process, the user can adjust
the temperawre, the strength, the music, the back angle, the
interval mode ,etc.
When the mode 1 running end, the remote control will automatic
turn off with a long alarm sounds.
The position l in the left pattern means when the internal
projector running to there, it will stop 120 seconds to make a
thermal therapy.
the max height of the jade roller can rise 65mm.
Total have 3 breath program mode.
C,,
C
r
‘-.
C
LC
,
C
breath program 1
Mode 1
breath program 2
¡
breath program 3
Mode 2
1— T)
Turn on the remote control, the appliance will automatic select
mode L press the mode key once, the mode 2 will be selected,
then the appliance will scanning the body height of the user, after
this it will running as the mode 2, during the running, the user can
adjust the temperature, the strength, the music , the back angle,
the interval mode etc.
When the mode 2 running end, the re
turn off with a long alarm sounds.
The positiori3” in the left pattern means when the internal projector
running to there, it will do the breath program, the breath time
is 90 seconds.
11

 

Machine generated alternative text: Mode Instruction
Mode 3
Mode 4
Turn on the remote control, the appliance will automatic select
mode 1, consecutive press the mode key twice, the mode 3 will
be selected, then the appliance will scanning the body height of
the user, after this it will running as the mode 3, during the running,
the user can adjust the temperature, the strength, the music, the
back angle, the interval mode ,etc.
When the mode 3 running end, the remote control will automatic
turn off with a long alarm sounds.
The position’j’ in the left pattern means when the internal
projector running to there, ¡t will do the breath program, the
breath time is 90 seconds.
Turn on the remote control, the appliance will automatic select
mode 1, consecutive press the mode key three times, the mode 4
will be selected, then the appliance will scanning the body height
of the user, after this it will running as the mode 4, during the
running, the user can adjust the temperature, the strength, the
music, the back angle, the interval mode ,etc.
When the mode 4 running end, the remote control will automatic
turn off with a long alarm sounds.
The position 4” in the left pattern means when the internal
projector running to there, it will do the breath program, the
breath time is 90 seconds.
Mode 5
Turn on the remote control, the appliance will automatic select
mode 1, consecutive press the mode key four times, the mode 5
will be selected, then the appliance will scanning the body height
of the user, after this it will running as the mode 5, during the
running, the user can adjust the temperature, the strength, the
music, the back angle, the interval mode ,etc.
When the mode 5 running end, the remote control will automatic
turn off with a long alarm sounds.
.. --,--.
12

 

Machine generated alternative text: Mode Instruction
Mode 6
The interval mode
Turn on the remote control, the appliance will automatic select
mode 1, consecutive press the mode key rive times, the mode 6
will be selected, then the appliance will scanning the body height
of the user, after this it will running as the mode 6, during the
running, the user can adjust the temperature, the strength, the
music, the back angle, the interval mode ,etc.
When the mode 6 running end, the remote control will automatic
turn off with a long alarm sound.
The position- in the left pattern means when the internal
projector running to there, it will do the breath program, the
breath time is 90 seconds.
During the running process of each mode (1-6), consecutive
press the interval/positioning button twice, the interval
massage mode will start, the running time is 5 minutes,
after running the end, the program will be back to the
previous automatic program.
The positioning mode
A.v
I0
Hi
During the running process of each mode (1-6), press the
interval/positioning button once, the positioning massage
mode will start, the running time is 90 seconds, after running
the end, the program will be back to the previous automatic
program.
13 I

 

Machine generated alternative text: Note betore use
Note before turn on the power
•iI -
1.To open the supporting mat, pull forward and then lower it
2. there is a magnet switch connection between the support mat and the main body mat, before
turn on the remote controller, please press the magnet switch part once and ensure the joint
connect well
Be careful when adjust the back angle.
Dont put the hands in when
adjust the back angle.
Close the supporting mat as the below schematic plot:
When the appliance in folding status, it can be used as a sofa bench, if power on, for security,
only the music function can be use.
Magnet switch
I 14

 

Machine generated alternative text: t’roauct composition
Remote control
Remote control connect cable
External projector
3 — Sphere
9—Sphere
External projector connect cable
Power cord
ÇZZL
USB Disk
Handheld controller bracket
15

 

Machine generated alternative text: Product installation
Remote control bracket installation diagram
3
Remote control connection
I 16
1
2
Using the supplied screws fix the
bracket at the number 2 position.

 

Machine generated alternative text: Product installation
The cables connection diagram
Earphone cable
connection
USB Interface
lfl;
lift connector
Mp3 USB Disk
17 I
..
Power cord
/fl
III—.
s,
Suppport mat
heating cord
External
projector cord
‘p
Main body mat

 

Machine generated alternative text: MOW to move me proa uct
1,Before move the product, disconnect the power cord, remote control, external
projector from the main body, and close the supporting mat.
Two people must hold both sides of the main body frame and lift and move
horizontally.
2. Don’t carry the device as the below:

 

Machine generated alternative text: seit inspection
In case of error during operation, the following messages appear
on the remote control display.
Symbol
Symbol
Error location
El
High Temperature Error
External projector /Internal projector/
Main heating element / Auxiliary heating element
E2
Faulty Temperature Sensor
Lnternal projector/ Main heating element/
Auxiliary heating element
E3
High Temperature Error
Internal circuit
E4
Overloading Motor Error
Horizontal motor drive
E5
Faulty Upper & Lower Limit Switch
E6
Overloading Motor Error
Vertical motor drive
E7
Faulty Communication line
Main computer and remote control connection
Internal connection for main computer
E8
Faulty Hall Effect Sensor
Stroke motor screw magnets with hall sensor failure
Caution
Crieck the error messages displayed and contact the (ustomer Support Center.
19 I

 

Machine generated alternative text: Lonilguratlon iorm
Note 1: the following table’’means haven, “the blank means non,
Note 2: the user manual only available for the configuration-M1012, M1013)
Configuration
MiOll
M1012
M1013
M1014
Rollers lift up and down
‘
[
“S” Track
O
Back Electric lifting
Legs Vibration
Leg Warmer
9-Sphere External Projector
F
3-Sphere External Projector
1
*
*‘
MP3
*
*
*
*
Leg germanium
Leg jade
Automatic Scanning
*
-...
20
Tourmaline Heating Mat

 

Machine generated alternative text: i’roauct specilications
Model No.
Voltage
flAC22oV±lo% SOHzi1E1AC11OVi1O% 6OHzil
Power Consumption
with heating 350W±10%. without heating 45W±10%;
Fuse rating
F8A; F5A; F15A
Remote Control
Wired
Noise
5OdB(A)
Environmental
Conditions
Transportation and Storage
temperature
-40°C +70°C
Transport and Storage
Atmospheric Pressure
500hpa lO6Ohpa
Transportation and Storage
relative humidity
10%—100%
+40
Operating environment
temperature
Operating atmospheric
pressure range
700— lo6oh a
Operating relative humidity
30%—75%
Massage
bed data
Rollers Maximum lift Height
6Omm±10%
Back Maximum Lift Height
4Smm±1O%
Rollers Lift Maximum
SupportWeight
60kg
Maximum Permissible Weight
135kg
Rollers massage length
702mm
Rollers massage width
l9Omm±5
Temperature setting range
00— 600
Time setting range
1-90 minutes
Measurement
When spread out
(L)2000mm x (W)7lOmm x (H)420mm
When fold:
(L)1280mm x (W)7lOmm x (H)420mm
Weight
NW
75kg
GW
80kg
21 I

V3+ Assembling Manual

Customer Rate List | Print Color e4 | Print Color m2 | Print Color e3 |Download Catalog | Dealer Rate List

Copyright 2017 BodyCure Health Equipments , India